In our labs, we placed the extender being tested inside a room down the hall and around the corner from the laptop used in the test. This was done to simulate a typical home environment, where you might have your router in one room and the extender in another. We then varied the distance between the laptop and the extender (from 8 to 20 to 35 to 55 feet) to measure the extender’s effectiveness at various distances. How to configure High Speed Mode in my dual band Range Extender (new-designed blue UI) 03-28-2016 323883

Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28) Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty. Open Source Code For Programmers (GPL) How to Connect Your Wireless Devices to the Range Extender via WPS as AP mode (Blue UI) 06-28-2022 76403

While WiFi extenders can increase the range of your wireless network, their effectiveness is limited by a host of factors, including the speed of the internet connection coming into your home, the distance from your router, the areas in your home in need of WiFi coverage, and the WiFi demands of your family. Wi-Fi 5) or 802.11ax (Wi-Fi 6 or 6E) support: Older, slower 802.11n extenders won’t cut it, even if they’re dual-band. Title: How to Configure the Wireless Network of a TP-Link Range Extender (new logo) 11-22-2023 493884

Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product. But you’re likely to notice a significant drop in throughput speeds in the “extended” network. That’s in part because an extender relies on the same frequency band as the router itself.

FAQs

It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.

In the radio frequency world, they’re called repeaters, but in WiFi they’re called extenders,” says Henry Parra, who leads CR’s testing for smartphones and wireless routers. “They repeat the signal on the same frequency to extend coverage.” Why my Range Extender is unable to detect 5GHz wireless network of my root router? 08-24-2021 651641 What's the solution if my TP-Link range extender can't connect to my router properly? 07-20-2021 335256 We used a professional wireless performance software suite to test each model’s capabilities. It measures the throughput of the extender directly from a nearby computer. That gave us more precise data than if we were to rely on a web-based service such as Speedtest.net or Fast.com, because data was being transmitted directly between the extender and a computer, not over the internet, which can introduce latency. We did three “runs,” and then averaged the measurements to come up with our final throughput score.What can I do if my client can’t roam between my wireless router and TP-Link AP & Range Extender product? 07-20-2021 247494

In some cases, according to our testing, a mesh router system may be a better solution. Those have two or three units that work together to spread WiFi more evenly throughout your home. How to set up Mac Filtering on router (blue UI) to control the devices connected to the range extender 10-24-2023 124356 Four of the models are compatible with WiFi 6, while three use the older WiFi 5 standard. WiFi 6 is a little faster than WiFi 5, as we first explained in 2019, but if you have a WiFi 5 router, it doesn’t matter which option you choose because you can only relay the signal in WiFi 5.How to confirm whether my range extender is successfully configured and in the best location 06-27-2022 334586