Built-in depth stop allows a preliminary cut of 2mm to be performed before the entire material is cut through for clean and splinter-free cutting

Makita SP6000 - SP6000 spares and parts - Power Tool Spares Makita SP6000 - SP6000 spares and parts - Power Tool Spares

MAKITA SP6000J1 165MM CIRCULAR PLUNGE SAW 240V WITH 1.5M GUIDE RAIL and MAKITA B-09298 165MM X 20MM X 48T SPECIALIZED BLADE FOR SP6000 PLUNGE SAWAmp motor with variable speed control dial (2,000 – 5,200 RPM) for optimum performance in a variety of materials

Makita SP6000J/2 165mm Electric Plunge Cut Saw 240V

Optional guide rail system interacts with the saw base to provide smooth, perfect, dead-on straight or bevel cutting (available as SP6000K1) Product dimensions are stated with a battery / batteries, if they affect the overall dimensions of the product. The Makita has an 8' long power cord which works fine but it would be helpful if it was a little bit longer. Many of the newer power tools these days are being supplied with longer cords in the 16' range which come in very handy since in a lot of situations an extension cord can be avoided. Blade The SP6000J2 saw has a bevel capability of -1° to 48° with positive stops at 22.5° and 45°. The saw delivers precise cutting, as the position of the blade enters the material on the same cutting line whether cutting straight or bevel. In addition, the saw has close-to-wall cutting (18mm) for expanded cutting applications. The built-in depth stop allows a preliminary cut of 2mm to be performed before the entire material is cut through for clean and splinter-free cutting. 12 AMP Direct-Drive Power for Smooth Cutting

Makita SP6000J Plunge Cut Saw 165mm in Makpac Type 4 Carry Case

Built-in depth stop allows a preliminary first cut of 2 to 3mm to be performed prior to cutting through the entire material for clean and splinter-free cutting My name is Dan Pattison and I am a self-employed builder and designer from Halifax, Nova Scotia, Canada. The majority of my local work consists of custom kitchens, built-in cabinetry, trim work and finish carpentry. I enjoy the design and build process and the satisfaction that comes from building things with my hands. Guide Rails (sold separately) interact with the saw base to provide smooth, perfect, dead-on straight or bevel cutting There’s no doubt that the Makita SP6000 is an impressive tool. However, there are a few things you may not like about it. Power My son and were in the beginning stages of a banquette and table build so what better way to put this new addition through the paces? Guide Rail Setup

Makita USA - Product Details -SP6000J Makita USA - Product Details -SP6000J

While the Matika SP6000 has a high power-to-weight ratio, it’s impressive that the machine weighs a mere 9 pounds. It is not guaranteed to survive several hard falls, but a bit of caution will ensure the product gives you years of excellent service. Handling The SP6000J1 saw has a bevel capability of -1° to 48° with positive stops at 22.5° and 45°. The saw delivers precise cutting, as the position of the blade enters the material on the same cutting line whether cutting straight or bevel. In addition, the saw has close-to-wall cutting (11/16-inch) for expanded cutting applications. The built-in depth stop allows a preliminary cut of 1/16-inch to be performed before the entire material is cut through for clean and splinter-free cutting. Optional Accessories: Guide Rail:117″– 194367-7, 54″– 194368-5 Clamp Set: 194385-5 Rip Fence: 165447-6

Support

The Makita SP6000J1plunge cut circular saw together with it's guide rail offers outstanding cutting accuracy and versatility. TheSP6000J1has an impresive 55mm max cutting depthand can also be tilted at a 45 degree angle and still cut 39mm deep. With its flat outer guard, it can cut extremely close to the wall, just 18mm away in fact.