DEWALT DXAEPI1000 Power Inverter 1000W Car Converter with LCD Display: Dual 120V AC Outlets, 3.1A USB Ports, Battery Clamps

Product Information

D. If an individual USB device is within specifications and the fault occurs, have the USB device checked for malfunction and do not continue to use it with these USB ports. When an appliance plugged into this unit is used outdoors, use only extension cords intended for use outdoors and so marked. com/tsc/product/dewalt-1000-watt-power-inverter-with-usb-digital-display-dxaepi1000" on this server. This can short out the batteries causing them to overheat and leak which could cause burns or other personal injury as well as damage to property. The DEWALT DXAEPI1000 Professional 1,000 Watt power inverter delivers enough heavy duty power to power all your tools and electronics on the job site or on the go.

Examples of borrowing costs (rounded to the nearest cent) assuming that all charges are purchases bearing interest at the regular annual rate of 20. Features an LCD screen showing real-time information on the status of power consumption, battery status, and any fault issues. VENTILATED – Allow at least three inches of clearance from other objects to ensure free air circulation around the inverter. The fault icon and the AC outlet icon will light solid and the bars on the Battery Icon represent the voltage level of the connected power source.A beep will sound, the backlit LCD and the USB power/fault indicators will activate to indicate the inverter is operating properly and the 120 volt AC outlets are ready to power appliances that draw up to 1000W continuous and USB outlets up to 3. The AC outlet icon and USB icon will light solid and the Digital Readout shows the total output wattage of AC outlets.

If you are using it in your car, make sure that your car battery is fully charged before using this product. Attach the positive slide-in connector at the end of the supplied red cable set into the groove of the positive (+) cable post. Induction motors, as well as some TVs, may require two to six times their rated wattage to start up.

If a fault condition exists in either of the USB ports, the LCD will display the USB fault condition and the USB power/fault indicators shut off. The fault icon and the USB icon will light solid and the bars on the Battery Icon represent the voltage level of the connected power source. Technical storage or access are strictly necessary for the legitimate purpose of allowing the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network. The standard North American 120 volt AC outlets and USB charging ports allow simultaneous operation of multiple devices. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.