Honeywell T6360B1028 Room Thermostat, 230/240V, White, 1

Product Information

lt;li>Maximum differential 1.0&#8451; at 20&#8451; at heat ramps of 3&#8451; per hour</li>

lt;li>Improved easy-to-wire terminals with built-in conductor clamps to ensure wiring is retained securely</li> The included features of a home thermostat may be just as important as any other consideration, depending on what you want in your thermostat. While some thermostats are very simple devices with few to no options outside of direct temperature control, other higher end models tend to include a ton of features that add to the thermostat's usefulness, including features such as remote control and the ability to program it to operate at specific times. For those who want a fully automated experience, getting a programmable model would be ideal, while for others, a simple model will be sufficient.

Navigation

Identify any wires labeled R, RH, or RC. You typically have one or two of those three. If you have one wire — even if it’s labeled RC — it goes into the R terminal, setting the jumper connecting terminals R and RC in place. Thermostats may have a jumper switch, metal staple, or plug. The jumper may also be a wire connecting the two terminals. If you have two wires, R or RH go into the R terminal and RC into the RC terminal. If you have more than one wire (for example, you have a wire labeled R and another wire labeled Rc), remove any jumpers between the R and Rc terminals or push the switch to open the RC terminal to insert a wire. It's also a good idea to take advantage of night conditions. For example, during the summer, the outside climate is usually at its nicest at night, where it is not so hot. Consider programming your thermostat to either use a minimum of cooling or turn off completely while you are sleeping. Take advantage of the ability to open windows if you can if it leaves your home still feeling a little stuffy. After all, clean, fresh air is free, and it doesn't cost any money to maintain it if you can get it through an open window. Stay Warm During the Winter One of the most important aspects to a home thermostat system is the control interface it uses, as this is what users will use to interact with and set the device. For simple thermostats that have few features, the control interface will most likely consist of just a few buttons used to cycle through the options, but other higher-end devices will feature touchscreen controls that have tons of options. The type that you will want, of course, will depend entirely on your tastes. Power Supply

They are used where to run a cable to a room 'stat on a wall would be a hassle. Instead one can mount the wireless 'stat anywhere (as it doesn't have any wires) and then they simply fit the receiver usually near the boiler where it can be wired in. lt;li>Versions with switches for positive-off selection, or summer/ winter (heat/cool) changeover operation</li> You should typically see an 18-gauge solid core wire. The most common configuration is five wires. However, you could see as few as two and many as ten. People love devices with advanced technology, and thermostats are typically no exception to this rule. Having a thermostat that takes advantage of many of the latest technological features is a must for many, and anything less simply won't do. This includes having access to features such as wireless connectivity and remote programming, as these features help make a home's climate control much more convenient, meaning one less thing to worry about throughout the day. To protect your equipment, turn off the power at the breaker box or switch that controls your heating and cooling. To confirm your system is off, change the temperature on your existing thermostat, so the system starts heating or cooling. If you don’t hear or feel the system turn on within 5 minutes, the power is off. You can skip this step if you have a digital thermostat with a blank display.I currently have a Baxi Duo-Tec Combi Boiler with an intergrated timer and a wired Honeywell T6360B1028 thermostat.