In these cases, you need a solution to convert TRS to TRRS. How to Convert TRS to TRRS Without Losing Audio Quality? USB-C – USB-C is a more versatile connection than USB-A in several ways. It allows for a faster data transfer rate, as well as a higher power link, meaning faster charging and the ability to run more power-hungry devices. USB-C connectors are also smaller than USB-A. They are increasingly utilised in computers and mobile devices, as well as microphones and other audio devices. If you don’t know the difference between balanced and unbalanced audio signals then you should read this article. USB-A – You should be familiar with this type of cable. USB-A is one of the most common connections found on virtually every modern computer (and many other devices). Itiseasy to identify as itislarger than other USB types. You know the one – the classic rectangular USB cable. The SC22 is a 300mm USB-C to USB-C cable which is included with the AI-Micro. Similar to the SC16, it is suitable for connecting RØDE microphones and devices with a USB-C output to USB-C compatible devices such as smartphones or tablets. VC1 – 3.5mm TRS Extension Cable (3m)

So, there is actually not enough use of TRRS in music production. Why Do You Need to Convert TRS to TRRS? TRS connectors are used with monitoring headphones, studio monitors, mixers, audio interfaces, and instruments. As you can see with the differentconnections listed above, it’s important to pay attention to what type of cable is required for your microphone and recording device. There’s nothing more frustrating than trying to plug in your mic and realising your cable is the wrong kind! The SC17 is a 1.5m-long USB-C to USB-C cable designed to connect RØDE microphones with a USB-C output to USB-C compatible devices. The SC17 is also Hi-Speed certified, making it ideal for connecting the NT-USB Mini or RØDECaster Pro to devices with a USB-C input, such as computers and tablets. The SC4 is a TRS to TRRS adaptor, designed to allow microphones with a 3.5mm TRS output to connect to deviceswith a TRRS input. This is ideal if you want to connect a RØDE VideoMic, lavalier or Wireless GO to a computer, smartphone or tablet. SC5 – 3.5mm TRS to TRS Cable for Wireless GO II (Not Available Separately)

Most microphones have either a 3.5mm, USB or XLR audio output (or a combination of these)for connectingthemto different devices. Features gold-plated connectors, impedance-matched TRRS cable for mobile devices, in addition to shielded construction In consumer electronics, they are used to carry a microphone signal along with the stereo audio signal.

The SC18 is a USB-C to USB-A cable. At1.5-metres long, it’s ideal for connecting USB-C devices such as the NT-USB Mini or RØDECaster Pro to devices with a USB-A input. SC19 – Lightning Accessory Cable (USB-C to Lightning) USB outputs are usually found on microphones intended for use with computers and mobile devices, like the RØDE NT-USB and NT-USB Mini, VideoMic Me range or Wireless GO II. Also when you want to connect a camera mic such as Rode VMPR VideoMic Pro which has TRS connector but your camera supports TRRS then you need to convert TRS to TRRS. To help you decide which one is right for you, we’ve put together the ultimate RØDE cable and adaptor guide, so you can get recording in no time.Allows you to connect your standard TRS (3-pole) 3.5mm microphone connector to your TRRS (4-pole) smartphone The SC20 is a USB-C to USB-A cable used for connecting the Wireless GO II to a USB-A device. It is shorter than the 1.5m-long SC18 and is only included with the Wireless GO II (not sold separately). SC21 – Lightning Accessory Cable (USB-C to Lightning, 300mm) The SC16 is a 300mm-long USB-C to USB-C cable designed to connect RØDE microphones with a USB-C output to USB-C compatible devices. SC17 – USB-C to USB-C Cable (1.5m)

The SC11 is a TRS splitter cable for connecting two mono outputs to a single stereo input. It is particularly suitable for connecting two microphones to a camera, for example, dual Wireless GO receivers, or a Wireless GO and a VideoMic. SC15 – Lightning Accessory Cable (USB-C to Lightning) The SC5 is a TRS to TRS cable that comes with the Wireless GO II (not sold separately) for connecting it to cameras and other devices with a TRS input. It features a memory wire cable rather than a coiled cable like the SC2, making it easyto route around a camera. Say goodbye to bad sound quality! This TRS to TRRS adapter significantly improves your audio quality by allowing you to connect an external battery-powered microphone to your smartphone, tablet or computer. Perfect for vloggers, live streamers, and just about anyone who records audio on their smartphone. Ideal for anyone looking to connect their microphone to their smartphone.XLR outputs are used for microphones intended to be plugged into professional audio equipment like mixers and audio interfaces, such as our studio and shotgun microphone range. Such as you may cut the cable and join them manually excluding the 4th cable. But, this is not a professional solution.

In short, a balanced audio cable cancels out the noise and gives you more clear audio signal. This will give you 4dB extra headroom in audio mixing and mastering. Most microphones don't work out of the box with smartphones and tablets - the MC3 TRS to TRRS adapter is specifically designed to allow you to connect a standard 3.5mm TRS battery-powered microphone to these devices right out of the box The SC7 is a TRS to TRRS patch cable, designed to allow microphones with a 3.5mm TRS output, such a RØDE VideoMic or Wireless GO, to connect to devices with a TRRS input like a computer or mobile device. SC8 – 3.5mm TRS to TRS cable (6m) The SC9 is a TRRS to TRRS cable designed to connect a wide range of audio devices. At 1.5 metres long, it is particularly suitable for connecting a smartphone to the RØDECaster Pro. SC10 – 3.5mm TRRS to TRRS Cable If you want to convert TRS to TRRS without losing audio quality then you should follow the instructions given above.TRS is widely used in music production. The most common use of TRS cable is to carry balanced mono audio signals. The SC10 is a TRRS to TRRS cable designed to connect the VideoMic NTG (which has an auto-sensing TRS/TRRS output) to cameras or mobile devices, but can be used with any TRRS device. If you’re a creator, there’s a good chance you use multiple microphones to record with multiple devices in a wide variety of scenarios. This may mean the cable that came with your microphone doesn’t quite do the job in every scenario you need it to – either it’s not the right length, or the connection type is wrong for your recording device. Thankfully, we offer a range of high-quality cables and adaptors to suit a wide variety of applications.