Joined in 2023 
82 
63 About this deal
Unlike the TRS, the TS (tip-sleeve) unbalanced cable can relay stereo signals in long cables without interference. This allows you to give your fans a great show because you can move freely without worrying about noise distortion in your sound. Types of TRS Connectors When people say “microphone cable”, they are most likely referring to XLR cable – the standard microphone connector used since the 1950s. XLR connectors transmit balanced mono audio and sometimes stereo signals. It is commonly used to send and receive audio signals between devices. It has a balanced connection that resists noise or any kind of interference.
USB-C – USB-C is a more versatile connection than USB-A in several ways. It allows for a faster data transfer rate, as well as a higher power link, meaning faster charging and the ability to run more power-hungry devices. USB-C connectors are also smaller than USB-A. They are increasingly utilised in computers and mobile devices, as well as microphones and other audio devices. USB-A – You should be familiar with this type of cable. USB-A is one of the most common connections found on virtually every modern computer (and many other devices). Itiseasy to identify as itislarger than other USB types. You know the one – the classic rectangular USB cable.The SC21 is a 300mm USB-C to Lightning cable which is included with the AI-Micro. Similar to the SC15, it is MFi-certified, making it suitable for connecting RØDE microphones and devices with a USB-C output to iPhones or iPads with a Lightning input. SC22 – USB-C to USB-C Cable (300mm) The superiority of TRS vs XLR cable has been a heated discussion for quite some time. While you might think they are interchangeable, they have many fundamental differences in their performance. So, if you are looking for a new cable to hook your audio devices, it is essential to know the benefits and pitfalls of each type. Although TRS and XLR don’t differ that much from each other as far as sound quality is concerned, there are many situations when XLR cables are a more favorable choice. The bottom line is – XLR is fantastic for studio recording, and also works well for live performances. If superb sound quality is what you are after, XLR is your best bet. Balanced XLR to TRS cables are some of the most underappreciated cables in the studio. These unsung heroes of the audio world are designed to cancel interference during transmission. By doing so, balanced cables are highly resistant to interference and improve the overall stability of the signal.
Ok, let’s dive into our wide range of cables for all your connection needs. SC1 – TRRS Extension Cable (6m) An unbalanced audio cable comprises two main parts, a ground wire, and a signal. The former acts as the one who delivers audio frequencies, while the latter acts as a reference point and also serves as a shield from outside interferences. And while it does an excellent job of preventing slight hums from street lights and transformers, they also act as an antenna that, ironically, produces noise. Lightning – Utilised exclusively by Apple products, Lightning is an 8-pin connector that carries a digital signal for power or data transfer. If you’ve owned an iPhone over the past 10 years, chances are you’ve come across this cable before to charge your device or connect it to a computer. The SC16 is a 300mm-long USB-C to USB-C cable designed to connect RØDE microphones with a USB-C output to USB-C compatible devices. SC17 – USB-C to USB-C Cable (1.5m) Essentially, the audio inputs and outputs must flawlessly work together to achieve professional and studio-quality audio work. But which one between XLR and TSR is a good choice? Perhaps it would be easier to make your choice if you understand the characteristics of these two audio cables. Read on to learn more. XLR vs. TRS: Beginner’s Guide to Audio Cables TRS – Tip, Ring, and SleeveThe SC22 is a 300mm USB-C to USB-C cable which is included with the AI-Micro. Similar to the SC16, it is suitable for connecting RØDE microphones and devices with a USB-C output to USB-C compatible devices such as smartphones or tablets. VC1 – 3.5mm TRS Extension Cable (3m) Inflexibility. The equipment you are using must be compatible with XLR cable, which means the equipment must be a female port and the connector must be a male port.
The XLR connector is designed to send electrical signals from devices in the same direction. Audio industries and audio engineers often employ microphones to transmit audio signals that are electrical energy between devices. Mixing devices such as audio devices use a connector XLR to transmit signals. Second, you should consider how much space you have available for your cable. If you need longer cables than a TRS connection provides, then an XLR connection may be more suitable for you. TRS Is More Affordable and Ubiquitous: Although XLR is more robust, tougher, and less susceptible to shorts, TRS is a more widespread cable connector type because it’s so cheap. You’re likelier to avail of a TRS for balanced single channel, stereo, mono, and high-level speaker connections. This ubiquitous nature is the reason why it creates a higher risk of incorrect linkages though. XLR has a more limited application, which is balanced line-level audio.The main benefit of using an XLR balanced cable is its high sound quality compared to other types of plugs. With an XLR connection, the noise gets reduced, and sound quality is improved because each balanced signal travels through two wires instead of just one. TRS to TRS vs TRS to XLR Connections: Which Is Best for Your Needs? We recommend using XLR connectors if you have enough space for all of their components (adapter and cable). They provide better audio quality with less interference from outside sources like electromagnetic fields. Is XLR Better Than TRS—Pros and Cons Explained Versatility. TRS cable is a standard choice for musical instruments such as guitars, keyboards, and synthesizers. While keyboard workstations are now supporting XLR connectors, there are still lots of instruments that only support TRS connectors. The SC20 is a USB-C to USB-A cable used for connecting the Wireless GO II to a USB-A device. It is shorter than the 1.5m-long SC18 and is only included with the Wireless GO II (not sold separately). SC21 – Lightning Accessory Cable (USB-C to Lightning, 300mm)
Great Deal 
New Comment