If the walls do run out of square, I would normally use that as starting point and cut board accordingly at that edge, so the joist run square to board.

Tapered Edge for ceiling plasterboard? Square Edge or Tapered Edge for ceiling plasterboard?

Because the tapered edge design requires a specialised manufacturing process, this plasterboard type is slightly more expensive than the square edge variety. However, the price difference is negligible. also do i fill the V joint (if thats correct then put the adhesive jointing tape on or put the tape on first then fill the joint gap .Content is subject to errors. Please report any problems or comments to our webmaster at [email protected]. For this reason, skimming is always necessary when using square edge plasterboard (unless there are no joints, in which case you can skip this step). If you want to plaster your ceilings, you can use either a tapered or a square edge, but tapered edges will make no difference if you want to tape and joint your ceilings.

Joining tapered edge plasterboard question ? | DIYnot Forums Joining tapered edge plasterboard question ? | DIYnot Forums

is this correct I thought the boards were supposed to go together like a french cleat to give them support and a smaller join ? As a result, when using square edge plasterboard, skimming is always required (unless there are no joints, in which case you can skip this step)…. Cons ProsConsIdeal for construction ceilings Requires skimming rather than tapered edge plasterboard to keep drywall visible1Joints Zeile Most houses are under 2.4 metres from floor the ceiling, so a single board can be stood upright giving just the tapered joints running vertically down the walls. Another advantage of the “valley” is that you can use fiberglass mesh or other types of stronger joint tape when sealing the seam. This is a huge advantage in applications that require more strength, such as installing plasterboard in the kitchen or bathroom. A plasterboard tape is a type of adhesive tape used to join plasterboard sheets together. The tape is typically made from paper or cloth and is coated with an adhesive, which helps to hold the sheets in place.Avoiding joints is near impossible when constructing walls or ceilings with plasterboard. What you can do, however, is choose the right type for your project. Plasterboard panels have two edge types: tapered and square. Now you may wonder whether one is better than the other. Should you use tapered or square edge plasterboard? lastly my garage is 2.36m wide by 7 m but the ceiling joists run perpendicular to the garage so would i be better fitting the boards(2400x1200) in staggered joints length-ways or parallel to the joists making sure that the joints are on joist centres (the latter way would be easier but one wall is irregular and I would have to scribe each board to fit) is there an easy way to achieve this by leaving a gap at the bad wall side as I'm going to build a stud wall up to that height which will hide the gap . I am about to commence drylining /plasterboarding my garage ceiling I've insulated it and put up a vapour barrier and now am ready to fix the boards (whatever they are called !!) to the ceiling . The plasterboards, should be staggered and the joists ideally be perpendicular to long side of the board. https://www.zurich.com/NR/rdonlyres...F-4E5D5F270C8D/0/500045004BG900204WebOpt.pdf. While you can use straight edge for walls, too, remember that this choice is only suitable if you are planning on skimming the boards with plaster. For all dry lining installations (no skimming), only the tapered joint will allow you to fill it for a perfect finish. To End

Plasterboard Edger Board Drywall Edge Bevel Planer Carpentry Plasterboard Edger Board Drywall Edge Bevel Planer Carpentry

For ceiling plasterboard, which would consequently be plastered over, does it matter if the plasterboard is square or tapered? It is easier to work with tapered edge boards because they have less surface area and can be jointed, painted, and plastered.W. Rose™, Sands level & Tool Co®., Superior Tile Cutter®, Inc., Gator Tools®, Hi-Craft®, and Sunset Line & Twine® are Proud Brands of Kraft Tool Co.® It states that when just filling the joins in the plasterboard (using tapered edge) to butt the boards together with a V shape to allow the jointing compound to have more to adhere to .

Plasterboard Edger, Gypsum Board Cutting Tool Hand Plane

It is critical to select the right type of plasterboard for your ceiling project based on its specific needs. A tapered edge is not always the best option for a wall, but it is one of many types of plasterboard. Because it is designed specifically for drywall and ceiling applications, the tapered edge of plasterboard is easier to work with than the square edge. The plasterboard provides a smooth finish and is less expensive than traditional plasterboards. However, it is not suitable for use with skimming techniques and can only be installed with the device’s corners. Acoustic plasterboard is the best type of plasterboard for ceilings because it is water-resistant. This type of board is lighter and more sound-proof than traditional plasterboard. This product is more expensive than standard plasterboard, and it is not suitable for corner installation. Because acoustic plasterboard is the most popular type of plasterboard for ceilings, it is the most commonly used. Plasterboard Tape As mentioned above, you should use square edge plasterboard for ceilings and tapered edge plasterboard for the walls.Tapered is usually quite a bit more expensive, and even with the best planning, you'll still end up with square edges after cuts ... or you'll end up with a huge amount of waste. The tapered edge board has a smaller radius than standard boards, making it ideal for drylining and jointing. With this design feature, the plasterboard skims more easily, resulting in a better finish. This method saves time and eliminates the need for sanding and priming. The Different Types Of Plasterboard And Which One Is Right For Your Ceiling Is that double boarding on ceilings? If so, is that tapered edge sound board you're using on ceilings? Once the tape is applied and flattened, you can apply joint compound, normally two/possibly there applications. Letting each application dry and to be lightly sanded before next application. The final application should cover the and slightly over lap the taper of board, and finally sanded down till smooth and even when dry. Aluminium drywall profiles provide an aesthetically attractive and stylish finish to an interior wall, with aluminium ramp edge trim mostly complementing other areas such as skirtings and wall coverings.