Since its inception in 1849, Zinsser has constantly evolved and developed its product range, in response to the changing needs of the painting, decorating and wallcovering professional. Zinsser is recognised as a brand synonymous with unique, effective and user-friendly products and is responsible for introducing many industry firsts. Wallpaper solutions Clean surfaces with a solution of one-cup household bleach per gallon of water or a quality biocidal wash. Non-explosive in the presence of the following materials or conditions: open flames, sparks and static discharge and heat. No unusual hazard if involved in a fire. Paints suitable for galvanised metal, plastic, UPVC, glass, MDF, fibreglass, denatured, knotted or resinous timber

If product has dried on application tool, soak it overnight in a solution of equal parts household ammonia and water. Follow manufacturer’s instructions when cleaning spray equipment. Use Zinsser BIN Brush Cleaner to removed dried paint from brushesFinally, apply masking tape to any edges and protect the floor using a dust sheet to prevent any paint splatter on your carpet. Step 2: Painting If the timber is structural then it should be replaced if there is fungus growing, if it is just shelving or other then proceed as follows togive a good level of protection. When priming over stained areas, first attempt to remove as much of the stain as possible by washing, sanding, scraping, etc.

This is a common problem. It is likely the paint used previously is allowing moisture through to the plaster walls and ceiling causing the flaking, i.e. loss of adhesion. During winter the plaster has been absorbing moisture leading to the flaking problem. The ceiling will need to completely dry out before any painting is carried out. Leaving windows and the bathroom door open as much as possible, minimising use of the shower etc will help speed up the drying out process. If thinning is necessary (such as with conventional sprayer applications), use only water and no more than 10% by volume To prevent product from skinning over close container after each use. Keep lid tightly closed during storage. Protect from freezing. Warning: If you scrape, sand, or remove old paint, you may release lead dust. Special precautions should be taken during the surface preparation of pre 1960’s paint surfaces over wood and metal as they may contain harmful lead. When dry-sanding avoid dust inhalation by wearing a suitable protective face mask. Zinsser Mould Killer and Remover effectively removes dark stains caused by mould, fungus and algae. ..MORE It is ideal for use in bathrooms, kitchens and areas of high humidity and can be used on internal surfaces such as tiles, wood, plaster and wallpaper.Dryzone are one of the top brands when it comes to damp protection so if trusted quality is at the top of your list, they might be a good choice for you.

P102 Keep out of reach of children.P103 Read carefully and follow all instructions.P101 If medical advice is needed, have product container or label at hand.P261 Avoid breathing dust/fume/gas/mist/vapours/ spray.P280 Wear protective gloves/protective clothing/eye protection/face protection.P273 Avoid release to the environment.P302 + P352 IF ON SKIN: Wash with plenty of water/…P333 If skin irritation or rash occurs:P313 Get medical advice/attention.P501 Dispose of contents/container to … Surfaces must be clean, sound and free of dirt, dust, grease, wax, wallcovering adhesive, soap film, loose paint or other surface contamination.Clean up spills and drips with a wet cloth or rag. Wash application tools in warm, soapy water immediately after use. The chances are, you are looking for an effective mould preventing solution that will do the job long-term. For this reason, we highly recommend Suretherm Anti-Condensation Paint. Suretherm helps prevent the route cause of the problem - the moisture! All surfaces must be clean, dry and free from anything that can interfere with the adhesion of the paint. Remove loose and failing paint from the wall if required by scraping or brushing with a stiff bristle brush to a sound edge. NOTE: Perma-White® is formulated with a mildewcide approved for paint use and does not contain mercury or lead compounds. Yes, anti mould paint does a good job at inhibiting mould growth in areas where moisture and condensation is a problem as the biocides contained within the paint damage the cell membranes and essentially kills it before it has the chance to grow.